04 LS1-GTO Basic Upgrade Kit

This basic upgrade kit for the GTO intake system has everything you need except the hole saw and air filter. Includes pre-cut tubing and the grommet strip for the 4-1/4" hole. This upgrade kit contains stainless T-bolt clamps for a truly professional installation.

Contains the following parts:

1 ea 90HL40R35
3 ea 45L35
1 ea AL35X12 cut into a 6.5" piece and a 5.5" piece
1 ea 94100-0450
7 ea 94100-0400
1 ea 819-2110-2 (not shown)
1 ea AL35X4 (not shown) - this is the tube that goes through the fender well

Notes: The ends of the 3.5" 45-degree elbows that connect to the MAF should be trimmed about 1/4" (BE CAREFUL!). You can install it without trimming these ends, but it won't sit quite right.

The grommet around the 4-1/4" hole you drill in the fender, is formed from a soft plastic molding strip, which is included in the kit.

CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov