Cobra Head 90 Degree Elbows - Silicone & Rubber

Cobra head elbows are built for tight-clearance intake applications, such as an air cleaner outlet up against a firewall. The flared cobra head adds internal volume without adding length, so it makes a much tighter bend than a standard or short-radius elbow without losing airflow.

Silicone cobra heads come in 2" to 5" ID, including reducing sizes. Most are 5-ply with a thick 7/32" wall and rated to 350°F continuous, for turbo and intercooler systems under boost.

Rubber cobra heads come in 2.31" to 7" ID, including reducing sizes, and are rated to 250-275°F. They are a cost-effective, flexible choice for non-pressurized intake systems before the turbo.

Each product page lists the recommended clamps.