Rubber Elbow 2" ID X 90 Degree
Processing...

Rubber Elbow 2" ID X 90 Degree

Code: 90L20

$19.25

10 available for immediate delivery
Qty

Product Description

•••••

This 2 inch 90-degree intake hose can be used when you have two 2" OD tubes and you need to make a 90-degree bend. Temp rated at 250-275F. Wall thickness .20" 

Recommended clamps are 94100-0238.

NOTE: To make clamp installation easier, remove the locknut, align the clamp while holding in place, and screw on the locknut to capture the first few threads.

CA Residents: WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

90HL2
90L20